Rotary Table
Rotary tables are used for precision metalworking. they’re typically made with a solid base that can be clamped on to another fixture. The table may be a disc that rotates freely or by use of a worm (hand crank).
A rotary table may be a disc-shaped metalworking device used to obtain precise workpiece positioning. It enables a metalworker to chop or drill a workpiece at precise intervals around a vertically or horizontally fixed axis. A rotary table are often both manually or computer numerical controlled. Certain sorts of rotary tables are designed to be used with indexing plates or dividing plates for specialized operations. A rotary table used along with one of these positioning plates is generally referred to as a dividing or indexing head.
The rotary table device typically features a solid base that can be attached to a separate fixture or table using clamps. This device is essentially a rotating disc which holds the workpiece in place during cutting or drilling operations. The disc portion of a rotary table are often freely rotated for indexing procedures or turned by an attached control arm known as a worm wheel. Tables utilized in high precision operations are typically turned by a duplex-type worm wheel to compensate for backlash. Rotary tables utilized in automated metal working processes are turned by computer numerical controlled machinery.
Rotary tables are most frequently used in a flat position with the table’s axis having a vertical orientation. they’re sometimes mounted with the axis oriented in a horizontal fashion so that a tailstock can be used to support the free end of the workpiece. When this device is attached to a secondary table, the workpiece are often centered on the rotary table’s axis which is then centered on the cutting tool’s axis. during this configuration, the axes of the rotary table, secondary table, and cutter are coaxial to facilitate concentric cutting operations. This configuration also permits the secondary table to be offset for drilling equidistant holes during a workpiece.
Hollow Rotary Table Right Angle
| Product Details: | |
|---|---|
| Minimum Order Quantity | 1 Piece |
| Material | Aluminium Alloy |
| Power Consumption | 750 W |
| Series | GSA |
| Weight | 18 Kg |
| Motor Type | Servo Motor |
| Output Torque | 80 Nm |
| Permissible Input Speed | 2000 rpm |
| Permissible Torque | 80 Nm |
| Platform Flatness | +-0.005 mm |
| Permissible Axial Load | 5000 Nm |
| Input Speed | 2000 rpm |
| Ratio | 1/5 |
| Re-position Accuracy | +-5 arcsec |
| Output Speed | 400 rpm |
| Gearing Arrangement | Bevel / Miter |
Rotary tables are used in precision metalworking for accurate workpiece positioning. They have a solid base that can be clamped to another fixture and feature a rotating disc, which can be turned manually or via CNC control. Some models use indexing plates for specialized operations. The disc rotates freely or through a worm wheel, with high-precision versions using a duplex-type worm wheel to reduce backlash. Rotary tables are typically mounted flat with a vertical axis but can also be positioned horizontally with a tailstock for support. When attached to a secondary table, they allow for concentric cutting and precise hole drilling.
Hollow Rotary Table
| Product Details: | |
|---|---|
| Production Capacity | 100 |
| Material | Aluminium |
| Model Number/Name | GMR60 |
| Automation Grade | Automatic |
| Color | Black |
| IP Grade | IP60 |
| Permissible Torque | 5.3 N.m |
| Permissible Load | 3 Kg |
| Permissible Rotary Speed | 1080 Deg C/Sec |
Hollow Rotary Table also called Mini A-B Axis, it is a combination application made from two hollow rotary table equipped with stepper motor or servo motor making the perfect two dimensional movement. It is widely used in the mobile phone engraving and inspection fields. It also can be used for other automation product
The turntable is a rotating plate at the bottom of the rig that turns the drill string clockwise. The rotary table has four or six-sided bushings and a drill string attached around a keel drive that transmits power from the platform drive system to the drill string and drill bit. Since the power supply connects the rig to the rotary table and the drill string, it can be described as a coupling. Most drilling rigs have a rotary table as the primary drive of the drill string, but overhead drive systems that provide continuous rotation of the drill string replace rotary tables, keel bushings and general drives through a trenchless conversion. Construction requirements. The drive bogie is used on top-drive platforms, meaning the drive motor is on top of the platform. Drill string segments are first attached to the bottom of the well. As the drill string segments enter the well, additional drill string segments appear
- Application
- The Micro Rotary Axis could be applied in the following fields
- Laser equipment (multi-surface machine)
- Light gantry finishing machine
- Automation (simultaneous multi-surface machining)
- Dispensing (multi-surface)
- 3D detection
Rotary Indexing Table
| Product Details: | |
|---|---|
| Material | Aluminium |
| Model Name/Number | GSN130-18K-CS |
| Automation Grade | Automatic |
| Type | Rotary Indexing Table |
| Brand | G+ |
| Actuator Type | Electric Actuator |
| Color | Black |
| Re-position Accuracy | +-5 arcsec |
| Rated Power | 200-400 W |
| Motor Material | Aluminium Alloy Steel |
| Ratio | 1/18 |
| Bearing | Crossing Roller Bearing |
| Input Speed | 0-2160 RPM |
| Output Speed | 0-120 RPM |
| Motor Type | Dedicated Closed Loop Stepper |
| Positioning Accuracy | Less Than 2 arcmin |
| Design Precision life | 2000 Hour |
| Warranty | 12 Month |
| Output Torque | 0-20Nm |
| Gearing Arrangement | Helical |
| Net Weight | 3.3 Kg including motor |
| Permissible Torque | 20 Nm |
SQ-135B Rotary Stage
| Product Details: | |
|---|---|
| Minimum Order Quantity | 1 Piece |
| Material | Aluminum Casting |
| Usage/Application | Assembly Line Automation |
| Torque (N-m) | 40 |
| Weight | 3.83 Kg without motor |
| Protection Class | IP 65 |
| Indexing Accuracy | 30 Arc sec |
| Gear Ratio | 18:1 |
| Output Permisible Speed | 300 rpm |
| Angle Range | 360 Deg |
| Max Bearing Diameter | OD 115 mm |
| Actuator Type | Helical Gear |
| Travel Guide | Bearing |
| Backlash | 1 arc min |
| Axis Load Capacity | 1400 N |
| Moment of Inertia | 2.918 x 10-6 kg.m2 |
Rotary Table offers an unparalleled combination of good accuracy and high load capacity. These rotary stages utilize a precision worm gear with the worm “flexed” against the gear to ensure a proper mesh. This feature provides high repeatability with very smooth operation. Additionally, the rotary stages incorporate an oversized pre loaded cross roller bearing, offering exceptional stiffness and load capacity.
- Application
- Rotary Positioning for Pad Printing
- Rotary Positioning for Ultrasonic welding
- Rotary Positioning for Welding
- Vision Inspection
- Laser Marking
- Pneumatics Punching
- Packaging
- Features
- Equipped with Stepper Motor or Servo Motor and high resolution drive, working with Motion Controller to achieve automatic control.
- High precision fit; High load capacity; Long lifetime
- Worm gear / shaft drive system; Smooth motion
- Free direct and reverse rotation
- Ingenious design to minimize backlash
- Special design to minimize the end runout and off center
- Step motor and worm shaft connected with high quality elastic coupler to get low noise Synchronous transmission
- Servo-motor can be used for industrial application
Hollow Rotary Indexing Table
| Product Details: | |
|---|---|
| Material | Aluminium |
| Model Name/Number | GSN85-10K |
| Type | Electric |
| Color | Mat Black |
| Brand | Square Automation |
| Usage/Application | SPM,Laser Marking,Pad Printing,Welding,Filling & Sealing M/C |
| Permissible Moment Load | 13 Nm |
| Max Bearing Diameter | OD 70 mm |
| Protection Class | IP 65 |
| Backlash | Less Than 1 arc min |
| Angle Range | 360 Deg |
| Travel Guide | Bearing |
| Maximum Torque | 3 Times of Rated Output Torque |
| Table Weight | 1.17 Kg without motor |
| Runout of Output Table Surface | 15 microns |
| Output Permisible Speed | 200 rpm |
| Rated Output Torque | 13 Nm |
| Actuator Type | Helical Gear |
| Motor | Stepper Motor / Servo Motor |
| Base Material | Aluminum Casting |
| Permissible Thrust Load | 900 N |
| Parallelism of Output Table | 25 microns |
| Surface Treatment | Black Coating or Painting |
| Transmission Ratio | 181 |
Hollow Rotary Table Offers an unparalleled combination of good accuracy and high load capacity. These rotary stage utlize a precision worm gear with the worm “flexed” against the gear to ensure a proper mesh. This feature provide high repeatability with very smooth operation. Additionally, the rotary stages incorporate an oversized preloaded cross roller bearing, offering exceptional stiffness and load capacity.
- Rotary Positioning for Pad Printing
- Rotary Positioning for Ultrasonic welding
- Rotary Positioning for Welding
- Vision Inspection
- Laser Marking
- Pneumatics Punching
- Packaging
- Features
- Equipped with Stepper Motor or Servo Motor and high resolution drive, working with Motion Controller to achieve automatic control.
- High precision fit; High load capacity; Long lifetime
- Worm gear / shaft drive system; Smooth motion
- Free direct and reverse rotation
- Ingenious design to minimize backlash
- Special design to minimize the end runout and off center
- Step motor and worm shaft connected with high quality elastic coupler to get low noise Synchronous transmission
- Servo-motor can be used for industrial application
GSN-200-50K-SV2 Stepper Rotary Table
| Product Details: | |
|---|---|
| Material | Aluminum Casting |
| Model Name/Number | GSN200-50K-SV2 |
| Brand | Square Automation |
| Maximum Torque | 3 Times of Rated Output Torque |
| Protection Class | IP 40 |
| Runout of Output Table Surface | 15 microns |
| Travel Guide | Bearing |
| Angle Range | 360 Deg |
| Motor | Stepper Motor / Servo Motor |
| Rated Output Torque | 50 Nm |
| Permissible Thrust Load | 4000 N |
| Transmission Ratio | 50 |
| Max Bearing Diameter | OD 170 mm |
| Backlash | 1 arc min |
| Output Permisible Speed | 200 rpm |
| Table Weight | 11 Kg |
| Actuator Type | Helical Gear |
| Surface Treatment | Black Coating |
| Parallelism of Output Table | 25 microns |
| Permissible Moment Load | 80 Nm |
GSN200-50K Servo Rotary Table offers an unparalleled combination of good accuracy and high load capacity. These rotary stages utilize a precision worm gear with the worm “flexed” against the gear to ensure a proper mesh. This feature provides high repeatability with very smooth operation. Additionally, the rotary stages incorporate an oversized pre loaded cross roller bearing, offering exceptional stiffness and load capacity.
- Rotary Positioning for Pad Printing
- Rotary Positioning for Ultrasonic welding
- Rotary Positioning for Welding
- Vision Inspection
- Laser Marking
- Pneumatics Punching
- Packaging
- Features
- Equipped with Stepper Motor or Servo Motor and high resolution drive, working with Motion Controller to achieve automatic control.
- High precision fit; High load capacity; Long lifetime
- Worm gear / shaft drive system; Smooth motion
- Free direct and reverse rotation
- Ingenious design to minimize backlash
- Special design to minimize the end runout and off center
- Step motor and worm shaft connected with high quality elastic coupler to get low noise Synchronous transmission
- Servo-motor can be used for industrial application
GSN200-50K Indexing Rotary Table
| Product Details: | |
|---|---|
| Material | Aluminium |
| Model Name/Number | GSN200-50K |
| Brand | Square Automation |
| Color | Mat Black |
| Sizes | 200 x 200 mm |
| Usage/Application | Assembly Line Automation, Rotary Indexing SPM |
| Position Accuracy | 30 arc sec |
| Output Torque | 55 Nm |
| Gear Ratio | 50 |
| Output Speed | 200 RPM |
| Table Weight | 11 KG |
| Travel Guide | Bearing |
| Surface | Anodise |
| Angle Range | 360 deg |
| Table Runout | 20 microns |
| Protection Class | IP65 |
| Motor | Servo Motor |
| Parallelism of Table | 20 microns |
| Gear Type | Helical |
| Backlash | 1 arc min |
| Max Torque | 3 times rated torque |
GSN200-50K Indexing Rotary Table The (SQ Rotary Stage Series) offers an unparalleled combination of good accuracy and high load capacity.
These Rotary Stages utilize a precision Helical gear with wheel “flexed” against the gear to ensure a proper mesh.
This feature provides a high repeat ability with very smooth operation, additionally the Rotary Stages incorporate an oversize pr-loaded Bearing offers a exceptional stiffness and load capacity.
GSN85-10K Servo Indexer Rotary Table
| Product Details: | |
|---|---|
| Material | Aluminum Casting |
| Model Name/Number | GSN85-10K |
| Automation Grade | Automatic |
| Transmission Ratio | 181 |
| Maximum Torque | 3 Times of Rated Output Torque |
| Output Permisible Speed | 200 rpm |
| Actuator Type | Helical Gear |
| Permissible Thrust Load | 900 N |
| Permissible Moment Load | 13 Nm |
| Protection Class | IP 65 |
| Runout of Output Table Surface | 15 microns |
| Parallelism of Output Table | 25 microns |
| Table Weight | 1.17 Kg Without Motor |
| Motor | Stepper Motor / Servo Motor |
| Rated Output Torque | 13 Nm |
| Angle Range | 360 Deg |
| Travel Guide | Bearing |
| Surface Treatment | Black Coating or Painting |
| Backlash | Less Than 1 arc min |
| Max Bearing Diameter | OD 70 mm |
GSN85 Servo Indexer Rotary Table offers an unparalleled combination of good accuracy and high load capacity. These rotary stages utilize a precision worm gear with the worm flexed against the gear to ensure a proper mesh. This feature provides high repeatability with very smooth operation. Additionally, the rotary stages incorporate an oversized pre loaded cross roller bearing, offering exceptional stiffness and load capacity.
- Rotary Positioning for Pad Printing
- Rotary Positioning for Ultrasonic welding
- Rotary Positioning for Welding
- Vision Inspection
- Laser Marking
- Pneumatics Punching
- Packaging
Hypoid Gear Rotary Table
| Product Details: | |
|---|---|
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Model Name/Number | GSH150 |
| Automation Grade | Automatic |
| Color | Silver |
| Speed | 90 rpm |
| IP Grade | IP 65 |
| Gear Ratio | 30K |
| Torque | 220 N.M |
| Bearing | Cross Roller Bearing |
| High Torque Maximum | 450 N.m |
Hypoid Gear Rotary Table is a kind of gearbox integrated right angle gearbox and Hypoid gears, featured with high torque, high gear ratio, high IP grade, high precision, low wear. It adopts sliding mode to rotate, the transmission precision can reach 30 arc seconds, the transmission efficiency is up to 96%; the gear geometric tolerance ≤ 0.002mm, up to JIS0 level standard. Hypoid Rotary Table also called High Torque Rotary Stage, Hypoid Hollow Rotary Stage, Right Angle Hypoid Gearbox, etc.
The turntable is a rotating plate at the bottom of the rig that turns the drill string clockwise. The rotary table has four or six-sided bushings and a drill string attached around a keel drive that transmits power from the platform drive system to the drill string and drill bit. Since the power supply connects the rig to the rotary table and the drill string, it can be described as a coupling. Most drilling rigs have a rotary table as the primary drive of the drill string, but overhead drive systems that provide continuous rotation of the drill string replace rotary tables, keel bushings and general drives through a trenchless conversion. Construction requirements. The drive bogie is used on top-drive platforms, meaning the drive motor is on top of the platform. Drill string segments are first attached to the bottom of the well. As the drill string segments enter the well, additional drill string segments appear
- Product Features of G+ Hypoid Rotary Table
- Right angle design
- High precision ,high torque, high regidity and long life
- Stable using with low noise
- Reliable and easy installation
Rotary Table Multi Axis
| Product Details: | |
|---|---|
| Usage/Application | Industrial |
| Material | Aluminium |
| Automation Grade | Automatic |
| Model Name/Number | GMR60-140-S-S |
| Brand | G+ |
| Packaging Type | Box |
| Phase | Single Phase |
| Permissible Rotary Speed | 1080 Deg C/Sec |
| IP Grade | IP60 |
| Permissible Load | 3 Kg |
| Permissible Torque | 5.3 N.m |
Mini A-B Axis Micro Rotary Axis for the 4th and 5th Axis for Mobile Phone Engraving and Inspection
The A-B Axis is an combination application made from hollow rotary tabel. It is widely used in the mobile phone engraving and inspection fields. It also can be used for other automation product.
Using high precision gear structure and radial bearing, the torque and rigidity are improved, the load is more stable, and the servo motor or stepper motor can be segmented at any angle. It can not only satisfy the digit control that the divider can not realize, but also the positioning accuracy is comparable to the direct drive motor, and the positioning of the inertia load can be realized in a short time.
This type of Micro Rotary Axis is combined with two hollow rotary table with stepper motor or servo motor and the stand making the perfect two dimensional movement .
We can supply 9 types of Micro Rotary Axis. The center distance ranges from 100mm to 190mm
- Application
- Laser equipment (multi-surface machine)
- Light gantry finishing machine
- Automation (simultaneous multi-surface machining)
- Dispensing (multi-surface)
- 3D detection
Industrial Application
Electric linear actuators are an efficient alternative to hydraulic and pneumatic cylinders, offering precise motion control, reduced maintenance, and cleaner operation. They are ideal for applications like SPM, packaging machines, welding machines, and pressing systems, enhancing automation with greater accuracy and reliability.
Automotive Industry
Medical Industry
Toy Industry
Get A Free Consultation With Us
Streamline your business with our cutting-edge automation services designed to boost efficiency and reduce costs. Contact us today for a free consultation and discover how we can transform your operations
